Every chord change in this pack glides: each note slides into its next note. A normal MIDI file has one pitch bend for all its notes, so the glides come in a different file for each DAW. Find your DAW below and follow its steps. It takes about two minutes.
48
The one number to remember is 48. The glides are written for a pitch bend range of 48 semitones, so your synth must be set to 48 too. If it is set to anything else, the chords play out of tune.
Ableton Live 11 and 12
UseLive.alcfrom the folder “1 Ableton Live clips”Tested by us
1Open the folder "1 Ableton Live clips", then the progression you want, and pick the file in your key.
2Drag the .alc file onto a MIDI track (or onto an empty space, and Live makes the track).
3Put an instrument on the track. Live's own instruments (Wavetable, Drift, Meld, Sampler) already receive the glides.
4Using a plug-in like Serum 2, Vital or Pigments? Right-click the plug-in's title bar in Live and choose Enable MPE Mode. Then, inside the plug-in, turn MPE on and set its MPE pitch bend range to 48.
5Press play.
6To edit a glide: double-click the clip and open the MPE tab (Note Expression) in the Clip View. Every note has its own pitch curve.
Do not drag the .mid files into Live for the glides: Live merges their channels and one bend moves every note. That is why Live gets its own clip.
FL Studio
Usevoices.midfrom the folder “3 MIDI one track per voice”Tested by us
1Open the folder "3 MIDI one track per voice", then the progression you want, and pick the file in your key. Use the "no BPM" copy if you do not want your project tempo to change.
2Use File > Import > MIDI file (or drag the .mid onto the Channel Rack).
3In the Import MIDI data window, leave "Create one channel per track" on (it is on by default) and click Accept. You get four channels named Voice 1 to Voice 4, each with its notes and its own pitch bend.
4Set the pitch range to 48 on all four channels. Click a channel's name to open it: at the top right of its window, next to the Pitch knob, there is a red Range number. It starts at 2. Drag it up until it reads 48. Do this on each of the four. This is the step that makes the chords right: at 2, every voice stays almost on one note.
5Pick a sound that can glide. FL loads FLEX with a piano on each channel, and a piano hides the glides. In FLEX choose a pad, an organ or strings, the same preset on all four. Or swap FLEX for your own synth: right-click the channel name, choose Replace, and pick it.
6Press play. The four channels together are the chord.
FL Studio has no MPE, so it cannot play the MPE file. One channel per voice gives the same result. Using a plug-in instead of FLEX? Keep the channel Range at 48 and set the plug-in's own pitch bend range to 48 too. Each voice is one long note in the piano roll: the glides live in its Channel pitch events, which you can see and edit in the piano roll's Control lane.
Logic Pro
UseMPE.midfrom the folder “2 MPE MIDI”
1Make a Software Instrument track with Alchemy, ES2 or Sculpture.
2Open the instrument's window and click the small arrow at the bottom to show the extra settings. Set MIDI Mono Mode to "On (Common Base Channel 1)" and set the pitch bend range next to it to 48.
3Open the folder "2 MPE MIDI", then the progression you want, and drag the file in your key onto that track, at bar 1.
4If Logic asks about importing the tempo, say no to keep your project tempo (or use the "no BPM" copy).
5Press play.
6Using a plug-in like Serum 2, Vital or Pigments instead? Skip step 2. Turn MPE on inside the plug-in and set its MPE pitch bend range to 48. Leave the track's MIDI channel on All.
Cubase
UseMPE.midfrom the folder “2 MPE MIDI”
1Add an Instrument track with a synth that can do MPE (Serum 2, Vital, Pigments, HALion).
2Inside the synth, turn MPE on and set its MPE pitch bend range to 48.
3Open the folder "2 MPE MIDI", then the progression you want, and drag the file in your key onto that track.
4In the track's Inspector, set the MIDI channel to Any. This keeps every note on its own channel, which is what carries the glides.
5Press play.
If Cubase splits the file into many tracks when you drag it in, open Preferences > MIDI > MIDI File, turn off Auto Dissolve Format 0, and import again.
Reaper
UseMPE.midfrom the folder “2 MPE MIDI”
1Insert a new track and add a synth that can do MPE (Serum 2, Vital, Pigments, Surge XT).
2Inside the synth, turn MPE on and set its MPE pitch bend range to 48.
3Open the folder "2 MPE MIDI", then the progression you want, and drag the file in your key onto that track.
4If Reaper asks whether to import the tempo, say no to keep your project tempo (or use the "no BPM" copy).
5Press play.
Studio One
Usevoices.midfrom the folder “3 MIDI one track per voice”
1Open the folder "3 MIDI one track per voice", then the progression you want, and drag the file in your key into the arrangement. Studio One makes four tracks, one per voice.
2Drag the same synth, with the same preset, onto each of the four tracks.
3Inside each synth, set the normal pitch bend range to 48. Leave MPE off.
4Press play. The four tracks together are the chord.
Studio One keeps one MIDI channel per track, so the MPE file would lose its glides there. One track per voice gives the same result.
Bitwig Studio
Usevoices.midfrom the folder “3 MIDI one track per voice”
1Open the folder "3 MIDI one track per voice", then the progression you want, and drag the file in your key into the arranger. Bitwig makes four tracks, one per voice.
2Put the same synth, with the same preset, on each of the four tracks.
3On each one, set the pitch bend range to 48 (in a Bitwig instrument, the PB Range setting; in a plug-in, the bend range inside the plug-in).
4Press play. The four tracks together are the chord.
Any other DAW (GarageBand, Reason, Pro Tools, MPC, Maschine...)
Usevoices.midfrom the folder “3 MIDI one track per voice”
1Import the file from "3 MIDI one track per voice" so that each MIDI track becomes its own track in your DAW. You should see four tracks, one per voice.
2Put the same synth, with the same preset, on each track.
3Set each synth's pitch bend range to 48.
4Press play. The four tracks together are the chord.
This works anywhere because it only needs a normal pitch bend, which every synth has.
Did it work?
Play the first two chords.
Right: the chord holds, then every note slides into the next chord, and both chords are in tune.
Wrong: see "If it does not sound right" at the end.
If it does not sound right
The chords are out of tune, or the notes swoop much too far (or barely move).
The synth's pitch bend range is not 48. Set it to 48: in MPE mode it is the MPE or per-note bend range, on the one-track-per-voice file it is the normal bend range.
All the notes bend together, like one big siren.
The synth is not in MPE mode, or your DAW merged the channels. Turn MPE on in the synth (and in Live, Enable MPE Mode on the plug-in). If that does not fix it, use the file from "3 MIDI one track per voice" instead: it works in every DAW.
There is no glide at all: the chords just change.
Check that you are not using a file from "4 Plain chords MIDI", which has no glides on purpose. Then check that your sound can bend: pianos and many sampled instruments ignore pitch bend. Try a synth pad, an organ or strings.
Each note starts with a click or re-attacks on every chord.
Pick a sound with a slow attack and some release (a pad, strings, an organ). Plucks and keys restart on every note, which hides the glide.
My project tempo changed when I dragged the file in.
Undo, and use the "no BPM" copy of the same file.
Good to know
Just want the chords?
Folder "4 Plain chords MIDI" has the same progressions as normal chords with no glides. Drag them onto any instrument: a piano, a sampler, a drum machine. The chord names are in the file as markers.
Do not want to set anything up?
Use the WAVs. The Church Organ, Cinematic Strings and Choir WAVs already have the glides in the sound. Drag one into your project, set your tempo to the bpm in the file name, and chop or sample it like any loop.
Which key is which file?
Every progression comes in all 12 minor keys, and the key and the bpm are in each file name ("Am 66bpm"). Pick the one that matches your track. Do not transpose the MIDI inside your DAW if you can avoid it: the file in the right key already has the right glides.
What does "no BPM" mean?
Each MIDI file comes twice. The normal one carries its tempo. The "no BPM" copy is the same notes without a tempo, so dropping it into your project never changes your project's tempo.
We make and test these files in Ableton Live and FL Studio. The steps for the other DAWs follow each maker's own manual. If your DAW does something different, write to support@ffunk.com with your DAW and version: we will get you gliding and fix this guide.